AIO

  • Can NZXT 240 or 280 AIO like X53, X63, Z53, Z63. fit in to the case?
  • Yes, but only in 3-Slot GPU mode. The pump head on those NZXT AIOs is too tall for 4-Slot GPU mode where there is less space available on the Motherboard + CPU side. However, EKWB, CORSAIR, LIAN LI 240, and 280 AIOs have been tested to work.
  • GPU and AIO Compatibility - ex:How would a 3090 FE perform with a 280 AIO as either intake or exhaust
  • 280 AIO is recommended because it offers similar performance to a 360mm AIO, where 280 AIOs tend to be cheaper than 360 AIOs.The biggest AIO tested to fit is the ARCTIC Liquid Freezer II 280, but it is a very tight fit. Other more common 280 AIOs from NZXT, Corsair and Deepcool will also fit.Fans in exhaust or negative pressure setup should yield the best cooling results. This is true for most sandwich layout cases.
  • Will an ARCTIC Liquid Freezer II 280mm AIO fit in the case if I use an ASUS RTX 3080 Strix?
  • Arctic Liquid Freezer II 280 AIO will fit
  • AIO Compatibility, for example: Corsair H80i v2.
  • No, this AIO will not fit because two sets of fans on it makes it too thick.

GPU

  • How does Meshlicious’s 3-Slot GPU mode and 4-Slot GPU mode work?
  • The Motherboard tray for Meshlicious functions as a divider splitting the available space between Motherboard + CPU side vs. GPU side. 3-Slot GPU mode and 4-Slot GPU mode is basically how much space is allocated to the GPU side. Allocating more space to the GPU side will limit the amount of space left for the Motherboard + CPU side.
  • Can I fit 2.5 slot thick GPUs into the Meshlicious?
  • Yes, we recommend 3-Slot GPU mode for 2-Slot or more GPUs.
  • Can I fit 3 slot or more thick GPUs into the Meshlicious?
  • Yes, we recommend 3-Slot GPU mode for 3-Slot *only if the side panel by the GPU is the Mesh Side Panel. Otherwise, we recommend 4-Slot GPU mode for 3-Slot or more GPUs.
  • Can I use the latest NVIDIA RTX 3000, AMD RX5000, or RX6000 series GPUs with the included riser cable?
  • Yes, but the motherboard BIOs for PCIe must be set to PCIe 3.0
  • GPU and AIO Compatibility – e.g. : How would a 3090 FE perform with a 280 AIO as either intake or exhaust/Will an ARCTIC Liquid Freezer II 280mm AIO fit in the case if I use a ASUS RTX 3080 Strix?
  • 280 AIO is recommended because it offers similar performance to a 360mm AIO, where 280 AIOs tend to be cheaper than 360 AIOs. The biggest AIO tested to fit is the ARCTIC Liquid Freezer II 280, but it is a very tight fit. Other more common 280 AIOs from NZXT, CORSAIR and DEEPCOOL will also fit. Fans in exhaust or negative pressure setup should yield the best cooling results. This is true for most sandwich layout cases. Arctic Liquid Freezer II 280 AIO will fit.

MB

  • Can I put Mini-DTX like ASUS ROG Crosshair VIII Impact motherboard into the Meshlicious?
  • Yes, but it will require a PCIe Riser at least 20cm or longer.

CPU Cooler

  • What is the max CPU cooler height that I can fit into Meshlicious?
  • CPU cooler height up to 73mm is supported in 3-GPU Slot mode. CPU cooler height up to 53mm is supported in 4-GPU Slot mode.
  • Will a 150mm or 165mm tall CPU cooler fit into the Meshlicious?
  • No. In order to be compatible with these types of coolers, the Meshlicious would need to be a lot bigger in both volume and footprint, which defeats the purpose of a small form factor system.

Hard Drive

  • How many 2.5” drives can I put inside the case?
  • Up to six 2.5” drives can fit inside the case if paired with horizontal GPU (see instruction manual for more details).
    Up to three 2.5" drives can fit inside the case if paired with vertical GPU (see instruction manual for more details).
  • How many 3.5” drive can I put inside the case?
  • Up to two 3.5” drives can fit inside the case if paired with horizontal GPU (see instruction manual for more details).

PSU

  • Can I use standard ATX power supply in the Meshlicious?
  • Yes, ATX Power Supply up to 160mm is supported.
  • Can I use standard SFX and SFX-L power supply in the Meshlicious?
  • Yes, SFX Power supply and SFX-L power supply are both supported.
  • Want to know the recommendation of Custom Line of ATX, SFX...size
  • enviroment:
    ASROCK Z490 ITX
    EK-Vector Strix RTX 2080
    Corsair SF600
    tested on Corsair SF600
    SFX Cable
    1 x 24 Pin Cable (300mm)
    1 x 4+4 Pin CPU Cable (400mm)
    2 x 6+2 Pin PCI-e Cable (300mm)
    1 x Dual SATA Power Cable (150mm)

Build Guide

  • PC Parts Guide
  • Please read before buying and building a PC with Meshlicious Case

    Note: The Motherboard tray for Meshlicious functions as a divider splitting the available space between Motherboard + CPU side vs. GPU side. Supporting 3-Slot GPU and 4-Slot GPU means how much space is allocated to the GPU, and allocating more space to the GPU side will limit the amount of space left for the Motherboard + CPU side.

    Select PC parts suggestions:

    This combination has been fit tested, and ideally for entry level builders on a budget.

    Asus ROG STRIX B550-I GAMING Mini ITX AM4 Motherboard
    &
    Asus GeForece RTX 3070 8GB ROG STRIX GAMING OC VIdeo Card

    For RGB synchronization, it is easier if the motherboard and GPU are from the same brand.

    Scythe Big Shuriken 3 50.79 CFM CPU Cooler
    Scythe Big Shuriken 3, at 70mm tall, has clearances for better motherboard compatibility.

    AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor
    AMD 5600X is chosen because it’s a decent value CPU for gaming.

    Samsung 970 Evo 1 TB M.2-2280 NVME Solid State Drive
    Please refer to the motherboard spec for other supported M.2 drives.

    SeaSonic FOCUS Plus Gold 750 W 80+ Gold Certified Fully Modular ATX Power Supply
    Please refer to the case spec for other supported Power Supplies.

    For more info please check on https://pcpartpicker.com/list/QxkRxc

MORE TOPICS

中文